• Tranexamic acid

    Tranexamic acid

    Tranexamic acid basic information Chemical formula: C8H15NO2 Molecular weight: 157.21 CASNo.: 1197-18-8 EINECSno.: 214-818-2 physicochemical property Density: 1.095 g/cm3 Boiling point: 300.2ºC at 760 mmHg Flash point: 135.4ºC Refractive index: 1.497 Appearance: white crystalline powder Solubility: soluble in water, acid and alkali, almost insoluble in ethanol, acetone, chloroform or ether [1] Molecular structure data Molar refractive index: 42.00 Molar volume (cm3/mol): 143.4 Isotonic specif...
  • Lithium tri-tert-butoxyaluminohydride

    Lithium tri-tert-butoxyaluminohydride

    Lithium tri-tert-butoxyaluminohydride CAS: 17476-04-9 Molecular Formula C12H28AlLiO3 Molar Mass 254.27 Density 0.942g/mLat 25°C Melting Point 300-319 °C (dec.) (lit.) Boling Point 66°C (THF) Flash Point 95°F Water Solubility Reacts with water. Solubility It is soluble in organic solvents at low temperatures. Vapor Presure 46mmHg at 25°C Appearance Solution Color Clear to slightly turbid colorless Exposure Limit ACGIH: TWA 50 ppm; STEL 100 ppm (Skin)OSHA: TWA 200 ppm(590 mg/m3)NIOSH: IDLH 2000...
  • Florfenicol


    Florfenicol C12H14Cl2FNO4S Molecular weight 358.213 White or off-white crystalline powder CAS 73231-34-2 EINECS login number 642-986-0 Density 1.45 g/cm³ Melting point is 153℃ [4] Boiling point 617.5℃ Flash point 327.3℃ At first, florfenicol was mainly used in aquaculture, and it was effective in treating pseudonuclear Pasteurellosis, streptococcosis and natural outbreak of Atlantic salmon furuncle in yellow croaker. Florfenicol is an antibiotic drug, which has a broad-spectrum antibacteria...
  • Flufenacet


    Flufenacet C14H13F4N3O2S cas:142459-58-3 Density: 1.416g/cm3 Boiling point: 401.5 c at 760mmhg. Flash point: 196.6 C. Steam pressure: 1.18e-06mmhgat 25 C. Physical and chemical properties: pure product is white to brown solid; Melting point 75-77℃; The vapor pressure is 9×10-5Pa(25℃). Solubility in water (mg/L, 25℃): 56 (pH 4, 7) and 54 (pH9). Toxicity: acute oral LD 50: 589 mg/kg in rats; Acute percutaneous LD50 in rats: more than 2000 mg/kg; No irritation to rabbit eyes and skin; Acute inha...
  • polyvinyl alcohol, vinyl alcohol polymer,PVA

    polyvinyl alcohol, vinyl alcohol polymer,PVA

    Name: polyvinyl alcohol, vinyl alcohol polymer
    Nickname: PVA
  • Titanium Dioxide

    Titanium Dioxide

    Name: Titanium(IV) oxide Alias: C.I. 77891; C.I. Pigment White 6; Titanium dioxide; Titanium Dioxide Anatase; Titanium Oxide; Titania; Titanium (IV) dioxide; Rutile; dioxotitanium CASNo.: 13463-67-7; 1317-80-2; 1317-70-0 MDL:MFCD00011269[1] Molecular formula: TiO2 Molecular weight: 79.8658 Melting point 1843°C The boiling point is 2900 C. Density of 4.17 g/ml at 25 C (Lit.) Flash point 2500-3000°C Save conditions AmberVial,Refrigerator Solubility Chloroform (lightly, sonicated), Hexanes (lig...
  • Sodium hydroxide,caustic soda

    Sodium hydroxide,caustic soda

    Sodium hydroxide
    caustic soda

  • chloroprene rubber CR322

    chloroprene rubber CR322

    Neoprene, also known as chloroprene rubber and Xinping rubber. Synthetic rubber produced by α-polymerization of chloroprene (2- chloro -1,3- butadiene) is widely used in weathering products, viscose soles, coatings and rocket fuels. The flake or block with milky white, beige or light brown appearance is an elastomer produced by alpha polymerization of chloroprene (i.e. 2- chloro -1,3- butadiene) as the main raw material. The solubility parameter of chloroprene rubber accounts for δ = 9.2 ~ 9....


    Application of PPO granules 1: For the production of heat-resistant parts insulation less wear resistant parts transmission parts and electronic components of medical 2: It can be used at higher temperatures gears, blades, valves and other parts can be replaced using stainless steel 3: Can produce screws, fasteners and connectors Product Properties * Good balance of properties * CreepStiffness and strength * Creep * Impact strength * Good electrical performance * Good fire retardancy * Chem...
  • Butyl rubber regeneration

    Butyl rubber regeneration

    Butyl reclaimed rubber belongs to an important category of reclaimed rubber. With more than 900 butyl inner tubes as raw materials, it is refined by 80 mesh filtration after desulfurization by the most advanced decomposition process. It has the characteristics of good strength, high fineness, strong air tightness and rich hand elasticity. It can be used alone to produce butyl rubber products such as small butyl inner tubes, butyl capsules, butyl sealing strips, etc. It can also be used togeth...
  • N-Methyl-2-pyrrolidinone(NMP) Cas:872-50-4

    N-Methyl-2-pyrrolidinone(NMP) Cas:872-50-4

    N- methylpyrrolidone, colorless and transparent oily liquid with slight amine smell. Soluble with water, alcohol, ether, ester, ketone, halogenated hydrocarbon, aromatic hydrocarbon and castor oil. Low volatility, good thermal stability and chemical stability, and can evaporate with water vapor. Have hygroscopicity. Sensitive to light. N- methylpyrrolidone is widely used in lithium battery, medicine, pesticide, pigment, cleaning agent, insulating material and other industries. 1. Chinese n...
  • TPU for shoe adhesive,

    TPU for shoe adhesive,

    Its characteristics are: 1. No yellowing; 2. Very fast crystallization; 3. High temperature resistance. This series of products have good adhesion and heat resistance to PVC, PU, rubber, TPR, EVA, nylon, leather and other substrates. Excellent adhesion and high heat-resistant temperature can be achieved without using curing agent. Because of its non-yellowing characteristics, it is especially suitable for bonding various white travel shoes. LY series polyurethane adhesive is a two-component ...
12 Next > >> Page 1 / 2